Snow Joe Saw Joe SWJ800E Manuel de l'opérateur télécharger pdf

A Division of Snow Joe, LLC

Model No. SWJ800E

Form No. SJ-SWJ800E-880E

SAVE THESE INSTRUCTIONS

OPERATOR’S MANUAL

Electric Pole Chain Saw

IMPORTANT!

Safety Instruction

All Operators Must Read These

Instructions Before Use

Always follow these safety guidelines. Failure to do so may

result in serious bodily injury or death.

mDANGER! This indicates a hazardous situation, which,

if not followed, will result in death or serious injury.

mWARNING! This indicates a hazardous situation, which,

if not avoided, could result in death or serious injury.

mCAUTION! This indicates a hazardous situation, which,

if not avoided, could result in minor or moderate injury.

General Safety

WARNING! When using electric gardening appliances,

basic safety precautions should always be followed to reduce

the risk of re, electric shock, and personal injury, including the

following:

• KEEP GUARDS IN PLACE and in working order.

• REMOVE ADJUSTING KEYS AND WRENCHES. Form habit

of checking to see that adjusting wrenches are removed

from the saw before turning it on.

• KEEP WORK AREA CLEAN. Clear working area of

branches and limbs after every cutting. Cluttered areas

invite accidents.

• DON’T USE IN DANGEROUS ENVIRONMENTS. Don’t use

power tools in damp or wet locations.

• DON’T USE THE POLE SAW IN THE RAIN.

• KEEP CHILDREN AWAY. All visitors should be kept a safe

distance from work area.

• DON’T FORCE TOOL. It will do the job better and safer at

the rate for which it was designed.

• USE RIGHT TOOL. Don’t force tool or attachment to do a

job for which it was not designed.

• WEAR PROPER APPAREL. Do not wear loose clothing

or jewelry which may get caught in moving parts. Use of

rubber gloves and substantial footware is recommended

when working outdoors.

• Wear protective hair covering to contain long hair.

• ALWAYS USE SAFETY GLASSES. Also use face or dust

mask if cutting operation is dusty.

• Everyday eyeglasses only have impact resistant lenses, they

are NOT safety glasses.

• DON’T OVERREACH. Keep proper footing and balance at

all times.

• MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean

for best and safest performance. Follow instructions for

lubricating and changing accessories.

• DISCONNECT TOOL. Disconnect the Pole Saw from the

power supply when not in use, before servicing, when

changing accessories or chain.

• REDUCE THE RISK OF UNINTENTIONAL STARTING.

Make sure switch is in off position before plugging it

into a power source.

• USE RECOMMENDED ACCESSORIES. Consult the owner’s

manual for recommended accessories. The use of improper

accessories may cause risk of injury.

• CHECK FOR DAMAGED PARTS. Before each use, a

guard or other part that is damaged should be repaired or

replaced and check for alignment of moving parts, binding

of moving parts, breakage of parts and any other conditions

that may affect its operation.

• NEVER LEAVE TOOL RUNNING UNATTENDED.

Turn power OFF. Don’t leave saw until it comes to

a complete stop.

• AVOID UNINTENTIONAL STARTING. Don’t carry Pole Saw

with nger on the switch.

• DON’T GRASP THE EXPOSED CUTTING BLADE OR

CUTTING EDGES WHEN PICKING UP OR HOLDING SAW.

• STAY ALERT. Watch what you are doing. Use common

sense. Do not operate Pole Saw when you are tired.

• STORE IDLE TOOL INDOORS. When not in use, appliances

should be stored indoors in dry, and high or locked-up

places out of reach of children.

Electrical Safety

WARNING! Repair or replace damaged or worn cords

immediately.

mWARNING! Don’t expose power tools to rain or wet

conditions. Water entering a power tool will increase the risk of

electrical shock.

mWARNING! To reduce the risk of electric shock, use

only with an extension cord intended for outdoor use, such

as an extension cord of cord type SW-A, SOW-A, STW-A,

STOW-A, SJW-A, SJOW-A, SJTW-A. or SJTOW-A.

1 2 3 4 5 6 ... 11 12

Résumé du contenu

Page 1 - Electric Pole Chain Saw

Page 2 - Pole Saw

Daily Checklist, Cleaning and Storing for your Pole SawTo help maintain your Pole Saw for optimum performance, we recommend you follow this checklist

Page 3 - Safety Symbols

11NOTES

Page 4 - Know Your Pole Chain Saw

A Two-Year Full Warranty for residential use in the United States and CanadaGeneral Conditions: Snow Joe, LLC warrants this product to the original pu

Page 5 - Assembling the Corded

Extension Cords• Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the curren

Page 6 - Saw (Fig. 5)

3KickbackmWARNING! Kickback may occur when the nose or tip of the guide bar touched an object, or when the wood closes in and pinches the saw chain in

Page 7 - Using the Saw

Know Your Pole Chain SawTechnical DataRated Voltage 120V ~ 60HzMotor 6.5 AMPBar/Chain Length 8-INTelescopic Shaft 67-IN -104-INMa

Page 8 - Maintaining Your Corded

UnpackingCarton Contents:• Corded pole saw body• Bar & chain• 7/32” Hex key wrench/ blade screwdriver• Bar cover• Safety and operating instruction

Page 9 - Corded Pole Saw

7. Install the sprocket cover (F) by inserting the rear tab (G) (Fig. 1) rst into the rear tab slot (Fig. 2) and position the cover onto the saw hea

Page 10 - CAUTION!

Using the Saw Adjusting Telescoping Pole (Fig. 7)1. Rotate the collar counterclockwise to loosen (Fig. 7).2. Push poles towards each other to shorte

Page 11

• Now make your nishing cut from the topside of the branch smoothly and neatly against the main member so the bark will grow back to seal the wound.•

Page 12 - A Two-Year Full Warranty

Chain TensionCheck the chain tension before using the saw when the chain is cold. The correct tension of a cold chain is when there is no slack on the

Commentaires sur ces manuels

Pas de commentaire

Snow Joe Saw Joe SWJ800E Manuel de l'opérateur

Naviguer en ligne ou télécharger Manuel de l'opérateur pour Scies à chaîne Snow Joe Saw Joe SWJ800E. Snow Joe Saw Joe SWJ800E Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels