Additional Safety Rules for
Leaf Mulcher/ Shredder
1. Become familiar with all sections of this owner’s manual
before attempting to operate the leaf mulcher/shredder.
This leaf mulcher/shredder should be used solely for the
purpose for which it was intended.
2. Use only parts or accessories specically designed for
use with this leaf mulcher/shredder. Using other parts or
accessories could increase risk of injury.
3. Keep your hands and other body parts and loose articles
of clothing away from the funnel and upper housing area.
4. Avoid dangerous environments – Do not use the leaf
mulcher/shredder in damp or wet locations. Do not
operate in rain. Store indoors when not in use, in a dry
and high or locked-up place out of the reach of children.
5. This leaf mulcher/shredder should be operated on a solid,
level surface.
6.
mWARNING! To reduce the risk of electrical shock, use
only an extension cord intended for outdoor use.
7. If for any reason you need to inspect, clean, or repair the
leaf mulcher/shredder, turn the unit off and wait until it
comes to a complete stop. Then, disconnect the power
cord before conducting such inspection or repair.
8. Disconnect the leaf mulcher/shredder from the power
source when it is not in use, before servicing, and when
replacing the cutting lines.
9. When feeding material into the leaf mulcher/shredder,
make sure that you do not accidentally insert pieces of
metal, rocks, bottles, cans, or other foreign objects.
10. Do not force the leaf mulcher/shredder. It will do the job
better and with less likelihood of injury if it is used at the
rate for which it was designed.
11. If the cutting mechanism strikes a foreign object or if
you notice an unusual rattling noise or vibration coming
from the leaf mulcher/shredder, immediately switch off
the unit and wait until it comes to a complete stop. Then,
disconnect the power cord and follow the steps below:
a) Remove any foreign or clogged material.
b) Check for any loose parts and tighten them to ensure
continued safe operation.
c) Replace or repair any damaged parts.
12. Check the discharge area periodically after stopping
the leaf mulcher/shredder to ensure that the processed
material does not build up and clog the motor cooling
vents.
13. Do not move the leaf mulcher/shredder when the motor
is running or when your nger is on the switch.
Unpacking
Due to modern mass production techniques, it is unlikely
that your power tool is faulty or that a part is missing.
If your power tool does not arrive intact, do not operate the
tool until the parts have been replaced or the fault has been
rectied. Contact the Snow Joe
®
customer service center
for assistance. Failure to do so could result in serious
personal injury.
3
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels